TW13 · Rental handover
End of Tenancy Cleaning in Hanworth
Set the appointment after the agreed home and route are available. Give the inventory and access details early if the property has separate entrances or utility spaces.

Use the actual Hanworth address as well as a park or road reference
The borough’s Hounslow Greentalk entry for Hanworth Park provides a local orientation reference. State the complete TW13 home address and door instead of directing someone only to the park or nearest main road. If the property has a gate or sits along an approach that others use, explain who can authorise carrying equipment over it. Name the flat number and any bell or entry instructions for the exact tenancy.
A private gate or secondary door can be easier for removals and unavailable later. Confirm its use from arrival to exit, including when the key holder will be at the home. If the approved path takes equipment around the building, give the location of steps or narrow sections. Tell the office when that approach is clear after the last belongings have moved out.
Address details
- Hounslow · Local authority
- TW13 · Main postcode districts
- Hounslow Greentalk entry for Hanworth Park · Local reference
Coordinate the door, gate and any extra key sets
Give the authorised person and available time for each entrance. A private gate, property door and separate utility space may not use one key. Check the actual approach again after removals. Keep confidential details within an agreed private channel and tell the office which contact can approve an alternative if a key is late.
- Set room review and key return times separately.
- Confirm the route for equipment leaving after the work.
- Give the agent the details needed to inspect or secure each entrance.
Where somebody else is due to collect a key or return to the home, share their timings and how they will gain access. If the return point differs from the property, tell the office where it is and who can accept the set. Make a plan to lock the doors after the final visitor leaves.

Plan the start and return
| Stage | Details to share | Confirm with |
|---|---|---|
| Entry | Full address, gate and approved route | Property contact |
| Work and review | Available rooms, electricity and water | Named authorised person |
| Secure and return | Inspection window, keys and lock-up | Agent or representative |
Review the exposed floors and inside glazing after moving
List reachable inner panes and floor surfaces along the route through the rooms. If there is a private staircase, say what is included and what remains in use. An older mark can become visible when carpets or furnishings move. Photograph it and state the floor material or finish if known. For agreed fitted shelves or drawers, remove personal contents and explain how they can safely be reached.
For any separately agreed carpet or fabrics, check the requirements before planning when the next person can use the room. Discuss carpet and upholstery treatments with the office and share the fibre, existing marks and advised drying or return-to-use arrangements. Note whether the inventory route needs to avoid a treated area.

Clear the inventory rooms and any final loading routes
Look at the property after removals and identify agreed fitted interiors, surface access and owner furniture or accessories staying with the tenancy. Take personal things from cupboards and furniture that are part of the work. Remove packaging or collection items from the foot of stairs, doors and narrow utility spaces. Keep the active set of keys, care notes and condition record easy to reach until handover.
- Confirm the exact time when agreed rooms and any utility space will be available.
- Keep working lights, water and electricity on until work and review finish.
- Record older marks or defects once belongings no longer hide them.
If an outdoor store or attached utility room is on the list, say who can release it. Explain how any late collection can use the exit without interfering with the agreed rooms. Make the person able to approve any changes available during the visit.
Name the standard kitchen items and any additional utility appliance
For a cooker, specify oven cavities, a separate grill and trays or racks belonging to the property. Give the model if it helps identify a particular surface. List agreed interiors for any fridge, freezer or other appliance. Remove food, cookware and personal liners. Arrange safe preparation for refrigeration in advance where needed and let a cooker cool before the agreed work.
Tell the office which cupboards, drawer interiors and surfaces are clear, and note known material or care instructions. Give a photo where a floor or cabinet edge has old damage or an unexplained mark. Ask about a separate cooker interior treatment if heavy residue or an unusual cavity needs extra time or equipment.

Record the surface materials and reachable fixtures by washroom
Give a separate name and position for the main bath, shower or WC. Identify glass, a mirror cabinet and reachable ledges or floors. Share any supplied guidance for a coating, tile or natural stone. Report scale at a specific location and record faults such as a leak, worn seal or loose fitting independently. Remove supplies and personal belongings from any interiors agreed for work.
- Describe which side of the screen can actually be reached.
- Keep existing damage and cleaning requirements on separate lines of the inventory.
- Report anything that requires an owner or contractor’s decision before arrival.
If a repair has just been done, confirm when adjacent surfaces will be available and which must stay untouched. Tell the office about a damaged catch or screen panel that remains secured. Describe the other reachable areas so they can be considered without assuming access to a faulty part.

Give the work details by room or feature
| Space | Information to include | Prepare beforehand |
|---|---|---|
| Fitted kitchen | Agreed interiors and each cooker cavity | Remove personal contents and identify owner items |
| Washroom | Material, fittings and reachable glass | Move products and record defects |
| Utility or living room | Floor, storage and retained items | Clear the agreed areas and describe appliance access |
Arrange clearance and access for independent work
For a bulky item still in the property, note ownership and whether a separate visitor can take it out before the relevant room is due to be reviewed. Confirm the approved approach. If a pane outside the home needs separate access or another service, describe location, reach and any authorisation rather than relying on the inside glass description.
If a floor needs a different method, give the material and condition, together with who needs to use it after the work. Arrange drying and access before setting the final agent visit. Confirm who needs a key if a repair or additional visit happens separately.


Window cleaning
Identify reachable glazing and agree a separate price for exterior access.

Carpet and upholstery
Describe the textile and leave drying time before the inspection.

Oven cleaning
List the cavities, removable racks and separate grill when asking about appliance work.
Quote the actual property, including rooms reached from outside
Give the complete address, bedroom and washroom counts and private levels. Describe retained furniture, agreed fitted interiors and cooker or utility appliance work. Include access, timing and what remains after removals. Give each specialist or extra request its own detail, including any limits on how surfaces can be reached. Check that the availability of the property matches planned handover.
Use the local preview to check postcode formatting and prepare the size and options. The office can confirm coverage for the exact address, the appointment details and final price. Give the earliest usable start and latest review deadline before approving a date.
Information for your quote
- Carpet treatment
- Outside glass
- Bulky collection
Optional work around the main clean
| Extra | What to describe | Timing |
|---|---|---|
| Carpet treatment | Material, route and next use | Allow advised drying |
| Outside glass | Position and safe approach | Separate approval and assessment |
| Bulky collection | Owner and authorised path | Complete before affected rooms are checked |
Questions before booking in Hanworth
Should I mention Hanworth Park in the approach note?
Give the full property address and door first. Add the park reference only if it helps with approved directions.
What if a side gate is locked after the movers leave?
Tell the office who can open it and how equipment will enter and exit. Arrange another permitted route or time if necessary.
Can an outside-access utility room be on the inventory?
Yes, if that room and its access are agreed. Identify its actual door, reachable interiors and any appliance work.
How do I explain old wear on a bathroom fitting?
Describe the fixture and material, show a photo and record the existing condition with the agent separately.
Can a carpet treatment be booked before the rest of the inventory?
Ask how it affects access and drying and state the next time the room must be used. Agree a realistic order with the office.
What if the key return is at a different house?
Give the authorised address and receiving person, and allow time to secure the property before the key goes there.
Ready to discuss the visit?
Have the complete postcode and key return time available when you call.
Arrange your Hanworth checkout clean
London service overview · Area directory
Nearby areas · Feltham
End of Tenancy Cleaning Prices in Hanworth
Tell us the number of bedrooms and bathrooms, and which extras you need for handover.
Get a Quote